Features
Technical Parameters
Datasheet PDF
Related Products
| You can strengthen your 4G connection significantly by using an 4G antenna (indoor or outdoor). | |
| This increases the signal strength,the signal stability and thus the transmission rate of your 4G | |
| connection.This LTE directional high gain antenna is predicted for 4G / LTE mainly, but is compatible | |
| with 3G and 2G as well. The antenna improves the signal in rural/suburban and locations where the | |
| mobile signal is weak. It is predicted to be installed on the buildings (on the pole or on the wall). | |
| Due to very wide working frequency range, the antenna is universal client for LTE bands. | |
| This antenna can help you tickle out the full performance for your 4G connection. | |
| The 7dBi 4G directional antenna is connected to the antenna connector of your 4G router. | |
| Once properly aligned, it can provides a stable 4G connection.The enclosure of the antenna is | |
| absolutely weatherproof and is specially designed for outdoor use.This allows you to use this | |
| antenna even in extreme weather conditions. |
| Electrical | |
| Frequency Range | 698-960/1710-2700MHz |
| F/B Ratio | >12/18 dB |
| Gain | 5/7dBi |
| V.S.W.R | ≤2.0 |
| Radiation | Direction |
| Horizontal Beam width | 68° |
| Vertical Beam width | 58° |
| Polarization | Vertical |
| Lightning Protection | DC-Grounded |
| Maximum Input Power | 50W |
| Impedance | 50Ώ |
| Connector | N Female |
| Cable Type | RG58U |
| Cable Length | 30cm |
| Antenna Radome Material | ABS |
| Mount way | Pole Mount |
| Diameter of Installation Pole | Ø30-Ø50mm |
| Mechanical | |
| Dimensions | 207x180x45mm |
| Weight | 500g |
| Rated wind velocity | 60m/s |
| Operating Temperature | -40℃ to+70℃ |
| RoHS Compliant | YES |
AC-D7027W08P.pdf